Institutional wheels are wheels for light transport vehicles, furniture, machines, devices, displays and other light constructions for offices, warehouses, shops and institutions. Characteristic of the equipment wheels is that they are non-marking, so that no traces are visible on the surface.
The series 32 Institutional castors are versatile castors and are mainly suitable on flat surfaces in a dry, or not permanently damp, environment. They are made for a long-term static load and have a riveted wheel attachment. The wheels are made of polyamide 6 and various variants are available with and without brakes. The wheel brackets are galvanized. In addition, there are variants of this series with two wheels in a bracket so that the wheel is suitable for heavier applications.
The series 36 Institutional castors are made of polyamide 6 and are suitable for use on an almost flat surface, in a dry or non-permanently humid environment. The tread of these wheels is made of hard and wear-resistant polyurethane that leaves no streaks. The wheel is also suitable for applications that usually stand still, but occasionally need to be moved. The series 36 device wheels have a screwed wheel attachment and are available in variants without and with brakes on the wheel and turntable. The wheel brackets are galvanized.
The series 37 Institutional castors are made of plastic and suitable for almost any surface, even with small obstacles. The wheels are made for use in a dry, or not permanently damp, environment. The wheels are fitted with a screwed wheel attachment, galvanized hub guards and a non-marking gray rubber tire. There are two variants of this series of Institutional castors, which differ mainly in the load capacity. Both variants are available without and with a brake on the wheel and the possibility of turning. The wheel brackets are galvanized.